|
Single Channel Ethernet and Power Receiver over Single Coaxial Cable
The FS-EPOC7001R is an Ethernet and power signal receiver over single coaxial cable. The FS-EPOC7001R is used with FS-EPOC7001T-PoE, which is an ideal solution for reconstruction of old projects without any change of existing coaxial cable. You needn't change coax into network cable when you want to change analog cameras into IP cameras. Both of Ethernet and power transmission distance max up to 1000 meters.
With high speed modem technology, the physical bandwidth reaches up to 100Mbps (bidirectional). The FS-EPOC7001R has a built-in multi-stage surge and lightning protection to protect video equipment against damaging voltage spikes and provide noise immunity to ensure quality signals without disturbing "hum-bars".
The FS-EPOC7001R is widely applied to the fields such as network expanding system, network security system, network information distribution system, network upgrading & expanding system, railway and urban transportation, metallurgy and mining, field operations, etc.
Note:
1. Max four transmitters can be cascaded.
2. Ethernet and power signals reach up to 1000 meters when transmitter is used with receiver in pairs.
3. The distance between the farthest transmitter and receiver is not more than 600 meters when the transmitters are cascaded.
4. Additional power will be required if the power of PoE IP camera exceeds 12W within distance of 1000 meters.
Step 1: Begin with all input/output devices turned off and power cables are removed.
Step 2: Connect 
of FS-EPOC7001T-PoE with of PoE cameras over one cat 5e/6 cable.
Step 3: Connect
of FS-EPOC7001T-PoE with
of FS-8001R over one Cat5e/6.
Step 4: Connect
of FS-EPOC7001R withof switch or NVR over one cat 5e/6 cable.
Step 5: Connect 53VDC/1.3A power adaptor into 
of FS-EPOC7001R.
Step 6: Make sure above connection is properly finished, then turn on the power.
When Green indicator is on, which indicates Ethernet signal works.
When Red indicator is on, which indicates power works.
|
Model |
FS-EPOC7001R |
|
|
Product Name |
Single Channel Ethernet and Power Receiver over Single Coaxial Cable |
|
|
Power Supply |
Power Adaptor |
Input:100-240VAC Output: 53VDC/1.25A |
|
No-Load Power |
1.5W(max) |
|
|
RJ45 Interface |
Ethernet Interface |
RJ45 Interface |
|
Transmission Distance |
100m (max) over cat5e/6 |
|
|
Standards |
IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, IEEE 802.3af |
|
|
Physical Speed |
100Mbps(bidirectional) |
|
|
Coaxial Cable Interface |
Coaxial Cable Interface |
BNC connector |
|
Coaxial Cable Impedance |
75Ohm |
|
|
Maximum Distance |
1000m (SYV75-5 Cable) |
|
|
Transmission Distance |
Distance |
Bandwidth |
|
300m |
100Mbps |
|
|
500m |
90Mbps |
|
|
800m |
70Mbps |
|
|
1000m |
55Mbps |
|
|
LED Indicators |
Green Light |
Coaxial cable connecting indicator |
|
Red Light |
Power indicator |
|
|
Lightning Protection Grade |
Network Port |
Differential Mode:2KV Common Mode:4KV Executive Standard： IEC61000-4-5 |
|
Device |
contact discharge: 3 grade air discharge: 3 Grade Executive Standard： IEC61000-4-2 |
|
|
Mechanical |
Dimensions(L*W*H) |
123*54*24mm |
|
Housing |
Aluminum |
|
|
Body Color |
Black |
|
|
Weight |
122g |
|
|
Environmental |
Operating Temperature |
0～55℃ |
|
Storing Temperature |
-25℃~85℃ |
|
|
Relative Humidity |
0~95% (non-condensing) |
|
• Security Monitoring System
• Multimedia Network Teaching System
• Medical Monitoring Display System
• Industrial Automation Control System
• Banking, securities, financial information display system
• Remote Network Server Monitoring
• Department Store Security
• Casino Security
• Hospitals, Airports and banks
• School Campuses
Copyright © 2019 Shenzhen Folksafe Technology Co., Ltd. All Rights Reserved | Designed by Joymagic
